How do I set Briiv 2 Pro to automatically activate?

Briiv 2 Pro will automatically activate when poor air quality is detected. You can change the sensitivity of when the unit activates in the app and on the unit.

To change the air quality sensitivity on the unit touch the front area of Briiv 2 Pro to wake it up.

On the lit display, use two fingers and hold down both the oval lights at the same time.

After a few seconds, the display will change to a colour display.

The round dot at the bottom can be changed from green (visible) to red (hidden). When visible, your Briiv will display a coloured dot to represent the air quality (green = good, red = poor). 

The central four dots are used to set the sensitivity using the oval lights at each end, with the right oval moving the selection up and the left oval moving the selection down.

The colour of the dot represents the standard air quality index:

•       Green = 0-50 ppm

•       Yellow = 51-100 ppm

•       Orange = 101-150 ppm

•       Red = 151+ ppm

The selection will flash as it is moved.

Once selected leave the display by letting your Briiv 2 Pro go to sleep, and your selection will be saved. You do not need to press any buttons to save the selection.

For example, if you select orange the Briiv 2 Pro will activate when the air quality 101-150 ppm. When the air quality improves, the Air Quality Indicator light will change colour. When the light is green, your air is clean.